Compliance Checklist

Dashboard
Course
- Course Reports
Users
- User Reports
Resource Library
Alert Centre

0

Notifications
Guest Login
- Profile
- Logout

Home

Compliance Tools

Compliance Checklist

"*" indicates required fields

Hidden

General Information

Hidden

Location*

Hidden

Date*

DD slash MM slash YYYY

Device

Construction and Materials

1) Have all seams been inspected for any loose stitching?*

Pass

Fail

2) Have all seams been repaired to original strength by using a combination of stitching and patching?*

Pass

Fail

3) Does the thread used have at least the same thread strength as used by the OEM?*

Pass

Fail

4) Have all sections of the inflatable been inspected for tears/rips?*

Pass

Fail

5) If any tears and rips have been identified, have they been stitched and patched to regain the original air pressure when inflated?*

Pass

Fail

6) Has all netting and mesh been inspected and repaired to original strength?*

Pass

Fail

7) Are all handles in good working order?*

Pass

Fail

Anchorage

8) Are all anchor straps in good condition and able to withstand forces as designed?

Pass

Fail

9) Are all anchor straps being used when in operation?

Pass

Fail

10) Are pegs/stakes used at least 16mm in diameter and made of steel?

Pass

Fail

11) Are pegs driven at least 500mm into the ground?

Pass

Fail

N/A

12) For height-based anchors, are straps of sufficient strength to withstand 1.6kN of force?

Pass

Fail

N/A

13) For height-based anchors, are straps sufficiently far from device to achieve an angle of less than 60 degrees from the ground?

Pass

Fail

N/A

Open Sides Access and Egress

14) Has impact absorbing material been placed at the entrance/exit of the inflatable to achieve an impact absorbing area of at least 1.2m on all sides?*

Pass

Fail

Blowers

15) Have blowers been inspected to be of good working order creating sufficient air pressure as designed?*

Pass

Fail

16) Are all finger guards intact to prevent injury and foreign debris entering the fan?*

Pass

Fail

17) Have all blowers been test and tagged?*

Pass

Fail

Electrical Wiring and Distribution Boards

18) Have all extension leads, distribution boards and RCD’s been tested and tagged?*

Pass

Fail

Additional Comments

*ATTENTION: One or more of your checks has failed. Please contact your device supervisor!

All access to and use of this App is subject to Privacy Statement and governed by Terms of Use and License Agreement.